Windows 10 laptop suddenly disconnected from network and internet, Running network diagnose results “the Default Gateway Is Not Available“? The Default Gateway is that node of your system which forwards packets from your network to outside networks. Network diagnose results Default Gateway Is Not Available that means there is something wrong with network configuration or corrupted driver software for the network adapter causing the problem. Here we have different solutions apply to Fix the Default Gateway Is Not Available Windows 10.
Default Gateway Is Not Available Windows 10
- If you first time encounters this issue, restart network devices include your PC.
- Temporarily disable antivirus protection and disconnect from VPN (if configured)
- Perform a clean boot that probably helps if third party startup service conflict causing the issue.
Reinstall network adapter
- Press Windows + T, type devmgmt.msc and click ok
- This will open the device manager, and display all installed driver list,
- Right-click on your network adapter and uninstall it.
- When prompted at the uninstall confirmation, press OK to continue.
- Restart your computer after the uninstall.
- On next start, Windows will help you reinstall the network adapter device driver automatically.
- Also, you can visit the device manufacturer website and install the latest driver for the network adapter.
Change Power Management Settings for your Network Adapter
- Press Windows Key + R then type devmgmt.msc and hit Enter.
- Expand Network adapters
- Then right-click on your installed network adapter and select Properties.
- Switch to Power Management Tab
- Here make sure to uncheck “Allow the computer to turn off this device to save power.“
- Click Ok and close the Device Manager.
- Now press Windows Key + I to open Settings
- Then Click System > Power & Sleep.
- On the bottom click Additional power settings.
- Now click “Change plan settings” next to the power plan which you use.
- At the bottom click on “Change advanced power settings.“
- Expand Wireless Adapter Settings, then again expand Power Saving Mode.
- Next, you will see two modes, ‘On battery’ and ‘Plugged in.’
- Change both of them to Maximum Performance.
- Click Apply followed by Ok. Reboot your PC to save changes.
Check network configuration
- Press Windows + R, type ncpa.cpl and click ok
- This will open the network connection window,
- You’ll see a list of network adapters.
- Identify the one that is being used to connect the machine to your network,
- right-click on it and choose Properties.
- Scroll to find Internet Protocol Version 4,
- Click on it and then click the Properties button.
- Another window will open.
Check the options as shown below: Obtain an IP address automatically and Obtain DNS server address automatically.
Click OK, then Close on the previous window. You may have to restart Windows for the changes to take effect.
Reset network configuration
Open the command prompt as administrator, and perform command below one by one.
- netsh int ip reset
- netsh winsock reset
- ipconfig /release
- ipconfig /renew
Close command prompt and restart windows. Check if this help to fix the problem.
Reset network settings
- If you have Windows 10, open the Settings app
- Click on Network & internet
- It should open on the Status page, but if not, click Status at the top of the menu in the left-hand pane.
- Scroll down on the right until you see Network reset.
- Click this and you’ll see a button to ‘Reset now’.
Did this help to fix network and internet connection problem on windows 10? Let us know in comments below,
- Configure these settings to Automatically Hibernate Windows 10 When Battery Is Low
- Solved: windows 10 black screen with cursor after login
- Solved: Windows Could Not Automatically Detect Network Proxy Settings
- 3 solutions to fix can’t sign in to Microsoft account on windows 10
- Here 5 ways to Free up Drive Space in Windows 10, 8.1 and 7