15 CMD Commands Every Windows User Should Know

15 CMD Commands Every Windows User Should Know

Microsoft has slowly but surely pushed the command line aside in the Windows interface. This is not without reason; it is an antiquated and mostly unnecessary tool from an era of text-based input. But many commands remain useful, and Windows 8 and 10 even added new features.

Here we present the essential commands every Windows user needs to know.

In case you’re not sure how to access the Windows command prompt, forgot basic Windows commands, or would like to know how to see a list of switches for each command (aka prompt codes), you can refer to our beginners guide to the Windows command line


A Beginner’s Guide To The Windows Command Line




A Beginner’s Guide To The Windows Command Line

The command line lets you communicate directly with your computer and instruct it to perform various tasks.
Read More

for instructions.

Prefer this tutorial in video form? We’ve got you covered:

Most files in Windows are associated with a specific program that is assigned to open the file by default. At times, remembering these associations can become confusing. You can remind yourself by entering the command “assoc” to display a full list of file name extensions and program associations.

You can also extend the command to change file associations. For example, “assoc .txt=” will change the file association for text files to whatever program you enter after the equal sign. The “Assoc” command itself will reveal both the extension names and program names, which will help you properly use this command. You can probably do this more easily in the GUI, but the command line interface is a perfectly functional alternative.

Cipher command

Deleting files on a mechanical hard drive doesn’t really delete them at all. Instead, it marks the files as no longer accessible and the space they took up as free. The files remain recoverable until the system overwrites them with new data, which can take some time.

The cipher command, however, wipes a directory by writing random data to it. To wipe your C drive, for example, you’d use the command “cipher /w:c”, which will wipe free space on the drive. The command does not overwrite undeleted data, so you will not wipe out files you need by running this command.

You can use a host of other cipher commands, however, they are generally redundant with BitLocker enabled versions of Windows.

Driverquery command

Drivers remain among the most important software installed on a PC. Improperly configured or missing drivers


Take Back Control Over Driver Updates in Windows 10




Take Back Control Over Driver Updates in Windows 10

A bad Windows driver can ruin your day. In Windows 10, Windows Update automatically updates hardware drivers. If you suffer the consequences, let us show you how to roll back your driver and block future…
Read More

can cause all sorts of trouble, so its good to have access to a list of what’s on your PC. That’s exactly what the “driverquery” command does. You can extend it to “driverquery -v” to obtain more information, including the directory in which the driver is installed.

File compare command

You can use this command to identify differences in text between two files. It’s particularly useful for writers and programmers trying to find small changes between two versions of a file. Simply type “fc” and then the directory path and file name of the two files you want to compare.

You can also extend the command in several ways. Typing “/b” compares only binary output, “/c” disregards the case of text in the comparison, and “/l” only compares ASCII text.

So, for example, you could use the following:

fc /l "C:Program Files (x86)example1.doc" "C:Program Files (x86)example2.doc"

The above command compares ASCII text in two word documents.

Ipconfig command

This command relays the IP address that your computer is currently using. However, if you’re behind a router (like most computers today), you’ll instead receive the local network address of the router.

Still, ipconfig is useful because of its extensions. “ipconfig /release” followed by “ipconfig /renew” can force your Windows PC into asking for a new IP address, which is useful if your computer claims one isn’t available. You can also use “ipconfig /flushdns” to refresh your DNS address. These commands are great if the Windows network troubleshooter chokes, which does happen on occasion.

Netstat command

Entering the command “netstat -an” will provide you with a list of currently open ports and related IP addresses. This command will also tell you what state the port is in – listening, established or closed.

This is a great command for when you’re trying to troubleshoot devices connected to your PC or when you fear a Trojan infected your system and you’re trying to locate a malicious connection.

Ping command

Sometimes, you need to know whether or not packets are making it to a specific networked device. That’s where ping comes in handy.

Typing “ping” followed by an IP address or web domain will send a series of test packets to the specified address. If they arrive and are returned, you know the device is capable of communicating with your PC; if it fails, you know that there’s something blocking communication between the device and your computer. This can help you decide if the root of the issue is an improper configuration or a failure of network hardware.

PathPing command

This is a more advanced version of ping that’s useful if there are multiple routers between your PC and the device you’re testing. Like ping, you use this command by typing “pathping” followed by the IP address, but unlike ping, pathping also relays some information about the route the test packets take.

Tracert command

The “tracert” command is similar to pathping. Once again, type “tracert” followed by the IP address or domain you’d like to trace. You’ll receive information about each step in the route between your PC and the target. Unlike pathping, however, tracert also tracks how much time (in milliseconds) each hop between servers or devices takes.

Powercfg command

Powercfg is a very powerful command for managing and tracking how your computer uses energy. You can use the command “powercfg hibernate on” and “powercfg hibernate off” to manage hibernation, and you can also use the command “powercfg /a” to view the power-saving states currently available on your PC.

Another useful command is “powercfg /devicequery s1_supported”, which displays a list of devices on your computer that support connected standby. When enabled, you can use these devices to bring your computer out of standby — even remotely. You can enable this by selecting the device in Device Manager, opening its properties, going to the Power Management tab and then checking the Allow this device to wake the computer box.

“Powercfg /lastwake” will show you what device last woke your PC from a sleep state. You can use this command to troubleshoot your PC if it seems to wake from sleep at random.

Powercfg energy command

You can use the “powercfg /energy” command to build a detailed power consumption report for your PC. The report saves to the directory indicated after the command finishes. This report will let you know of any system faults that might increase power consumption, like devices blocking certain sleep modes, or poorly configured to respond to your power management settings.

Windows 8 added “powercfg /batteryreport”, which provides a detailed analysis of battery use, if applicable. Normally output to your Windows user directory, the report provides details about the time and length of charge and discharge cycles, lifetime average battery life, and estimated battery capacity.

Shutdown command

Windows 8 introduced the shutdown command that—you guessed it!—shuts down your computer


How to Shutdown or Sleep Windows 10 With a Keyboard Shortcut




How to Shutdown or Sleep Windows 10 With a Keyboard Shortcut

The fastest way to shut down or sleep a Windows 10 computer is not with a mouse — it’s with the keyboard!
Read More

.

This is, of course, redundant with the already easily accessed shutdown button, but what’s not redundant is the “shutdown /r /o” command, which restarts your PC and launches the Advanced Start Options menu, which is where you can access Safe Mode and Windows recovery utilities. This is useful if you want to restart your computer for troubleshooting purposes.

Systeminfo command

This command will give you a detailed configuration overview of your computer. The list covers your operating system and hardware. For example, you can look up the original Windows installation date, the last boot time, your BIOS version, total and available memory, installed hotfixes, network card configurations, and more.

Use “systeminfo /s” followed by the host name of a computer on your local network, to remotely grab the information for that system. This may require additional syntax elements for the domain, user name, and password, like this: “systeminfo /s [host_name] /u [domain][user_name] /p [user_password]”

System File Checker sfc command

System File Checker is an automatic scan and repair tool


How to Fix a Corrupted Windows 10 Installation




How to Fix a Corrupted Windows 10 Installation

System corruption is the worst that could happen to your Windows installation. We show you how to get Windows 10 back on track when suffering from BSODs, driver errors, or other unexplained issues.
Read More

that focuses on Windows system files.

You will need to run the command prompt with administrator privileges and enter the command “sfc /scannow”. If SFC finds any corrupt or missing files, it will automatically replace them using cached copies kept by Windows for this purpose alone. The command can require a half-hour to run on older notebooks.

Tasklist command

You can use the “tasklist” command to provide a current list of all tasks running on your PC. Though somewhat redundant with Task Manager, the command may sometimes find tasks hidden from view in that utility.

There’s also a wide range of modifiers. “Tasklist -svc” shows services related to each task, use “tasklist -v” to obtain more detail on each task, and “tasklist -m” will locate .dll files associated with active tasks. These commands are useful for advanced troubleshooting.

Taskkill command

Tasks that appear in the “tasklist” command will have an executable and process ID (a four- or five-digit number) associated with them. You can force stop a program using “taskkill -im” followed by the executable’s name, or “taskkill -pid” followed by the process ID. Again, this is a bit redundant with Task Manager, but you can use it to kill otherwise unresponsive or hidden programs.

Virtually all Windows 8/8.1 computers ship from the factory with a recovery image, but the image may include bloatware you’d rather not have re-installed. Once you’ve un-installed the software you can create a new image using the “recimg” command. Entering this command presents a very detailed explanation of how to use it.

You must have administrator privileges to use the “recimg” command, and you can only access the custom recovery image you create via the Windows 8 “refresh” feature.

In Windows 10, system recovery


4 Ways to Reset Windows 10 and Reinstall From Scratch




4 Ways to Reset Windows 10 and Reinstall From Scratch

Windows 10 is still Windows, meaning it will need a fresh start every once in a while. We show you how you can get a fresh Windows 10 installation with as little effort as possible.
Read More

has changed. Windows 10 systems don’t come with a recovery partition, which makes it more important than ever to back up your data.

CMD Commands Recommended by Readers

These are the commands our readers use regularly:

  • nbstat: “For looking up names of computers on your network.” (Vferg)
  • netstat -ano | find “est”: “To get a list of processes with established CP connections.” (Eric)
  • tasklist | find “[process id]”: “To get the name of the executable associated with the particular process id that I’m interested in.” (Eric)
  • cacls: This command is “most handy to manually access hidden files and folder. (A41202813)
  • net use: “To map drives of networked CNC machines.” (Jimbo)
  • chkdsk /f C: “Checks your C: partition hard disk for errors and fixes bad sectors.” (Kai M)
  • Schtasks: To schedule tasks. (Teddy)

Command and Conquer Your Windows PC

This article can only give you a taste of what’s hidden within the Windows command line. When including all variables, there are literally hundreds of commands. Download Microsoft’s command line reference guide (in Edge or Internet Explorer) for advanced support and troubleshooting.

With Windows 10, Microsoft has moved from the command prompt to PowerShell


Command Prompt vs. Windows PowerShell: What’s the Difference?




Command Prompt vs. Windows PowerShell: What’s the Difference?

Windows users can get by without using either the Command Prompt or PowerShell. But with Windows 10 and new features around the corner, maybe it’s about time we learned.
Read More

. While you can still access the Windows command line, it may be time to switch. Note that you can use command line commands in the Windows PowerShell.

Explore more about: Command Prompt, Computer Maintenance, .

How to Run Portable Versions of Windows (And Why You’d Want To)